BLOGS

Here is a step-by-step procedure for overhauling a clutch at CarTech Hub:

Clutch Overhauling Procedure at CarTech Hub

Step 1: Inspection and Removal

- Inspect the clutch system for any signs of wear or damage

- Remove the clutch assembly from the vehicle

- Mark the position of the clutch cable or hydraulic line for reinstallation

Step 2: Disassembly

- Disassemble the clutch assembly, including the pressure plate, clutch disk, and release bearing

- Inspect each component for wear or damage

Step 3: Cleaning and Machining

- Clean the flywheel and pressure plate surfaces

- Machine the flywheel surface if necessary

Step 4: Replacement of Worn-out Parts

- Replace the clutch disk, pressure plate, and release bearing with new or reconditioned parts

- Install a new clutch cable or hydraulic line if necessary

Step 5: Reassembly

- Reassemble the clutch assembly in the reverse order of disassembly

- Align the clutch disk and pressure plate properly

Step 6: Installation

- Install the clutch assembly back into the vehicle

- Reconnect the clutch cable or hydraulic line

Step 7: Testing and Adjustment

- Test the clutch system for proper operation

- Adjust the clutch cable or hydraulic line as necessary

Step 8: Quality Control

- Inspect the clutch system for any leaks or signs of wear

- Test drive the vehicle to ensure proper clutch operation

Warranty:

CarTech Hub offers a warranty on our clutch overhauling services, providing peace of mind and assurance of quality workmanship.

Note:

The procedure may vary depending on the vehicle make and model, and the type of clutch system used. Our expert technicians at CarTech Hub will follow the recommended procedure for your specific vehicle.